HFC-450 Vehicle Water Well Drilling RigHFC-450 Vehicle Water Well Drilling RigHFC-450 Vehicle Water Well Drilling Rig
HFC-450 Vehicle Water Well Drilling RigHFC-450 Vehicle Water Well Drilling RigHFC-450 Vehicle Water Well Drilling Rig

HFC-450 Vehicle Water Well Drilling Rig

Borehole Diameter: 500mm
Maximum Drilling Depth: 470m
Power: 120kw
Hole drill pipe: φ89

We're here to help:

Easy ways to get the answers you need.

overview

Brief Introduction

HFC-450 vehicle water well drilling rig, truck- mounted rotary drilling rig . It's main components are installed in the "HOWO" brand  6×4 automotive chassis, The drilling mud is to cycle as the main way of drilling, equipped with the appropriate device, can realize reverse circulation drilling, DTH hammer drilling. Equipped with decompression device, significantly improving the drilling efficiency, Most of them adopt mechanical transmission and control operation.The features of the drive more reliable,to facilitate maintenance,Low failure rate and etc.The product can realize the farmland irrigation, drinking water and industrial water supply.

  • water well drilling rig
  • water well drilling rig
  • water well drilling rig

Technical Data

The shape size:11300×2500×4100(MM) The whole machine weight : 20T
Drilling aperture:500MM The drilling depth:470M
Kelly:108×108×7500MM Hole drill pipe :φ89
Drill chassis parts Chassis: HOWO 6×6 or 6×4
The mast section MODEL:Truss type
Load :40T
Height:11M Hook load:16T
Power part WP6D132E:120KW
Mud Pump MODEL BW900/25
  Maximum pressure 3 MPa
Maximum pump discharge 900L/min
Required power 37 Horsepower
Suction pipe diameter Φ101.6 MM
Diameter of the drain pipe Φ76.2MM
Rotary table gear box Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal 33 59 97 159 253 27
Main hoist Single rope tension: 4T Drum diameter: φ280MM Wirerope diameter: Φ17.5MM Rope capacity: 80M
Bailing Single rope tension: 4T Drum diameter: φ280MM wirerope diameter: Φ17.5MM rope capacity: 80M
Tool lifting Single rope tension: 1T Rope capacity: 45M
Control panel Hydraulic auxiliary operation, the source of power for hydraulic pump,convenient and efficient
Rotary table Rotary table through hole diameter (mm) Φ505
The rig can be installed 30KW generator After the installation of generator, can be used as electric welding, lighting, and other useful life.

 

get in touch

If you have any questions, please fill in the following information and we will respond to you in time.

  • *
Contact us now