Products

YOUR CURRENT LOCATION: Home > Products > Rotary Drilling Rig

HFR180DⅡ Rotary Drilling RigHFR180DⅡ Rotary Drilling RigHFR180DⅡ Rotary Drilling Rig
HFR180DⅡ Rotary Drilling RigHFR180DⅡ Rotary Drilling RigHFR180DⅡ Rotary Drilling Rig

HFR180DⅡ Rotary Drilling Rig

Rated Power: 194/2200KW
Max. Drilling Depth: 60m
Max. Drilling Diameter: 1600mm

We're here to help:

Easy ways to get the answers you need.

overview

It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability;
It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost;
Cummins electric control turbo-supercharged engine is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard;
Using full electronic control technology of CAN bus, Improves the reliability of the whole vehicle and simplify hydraulic line, Fully reflects the people, machine, electricity and liquid integration;
Winch-crowd and sleeve-driven functions are available for selection to CFA, hydraulic casing oscillator, DTH hammer satisfy various needs of the users;
It is equipped with a centralized lubrication system as standard configuration; maintenance is easier;
The machine obtains CE certfication of TüV Rheinland group.

Technical Data

Max.Drilling Diameter Uncased φ1600mm
Cased φ1300mm
  Max.Drilling Depth 60m
Dimension Working condition L × W × H 8350×4200×20480mm
Transportation condition L × W × H 14255×2960×3450mm
Overall Drilling Weight 57t
Engine Model CUMMINS QSB6.7-C260
Rated Power 194/2200kw
Hydraulic System Working pressure 35MPa
Rotary Drive Max. output torque 180KN.m
Rotary speed 6~33r/min
Spin off speed 102r/min
Pull-Down Cylinder Max.pull-down piston push -
Max.pull-down piston pull -
Max.pull-down piston stroke -
Crowd Winch Max.pull-down piston push 210KN
Max.pull-down piston pull 210KN
Max. pull-down piston stroke 13000mm
Main Winch Max.pulling force 180KN
Max. single-rope speed 65m/min
Diameter of the steel wire rope 28mm
Auxiliary Winch Max. Pulling force 50KN
Max. single-rope speed 70m/mim
Diameter of the steel wire rope 16mm
Drilling mast Left/right inclination of mast 42432°
Front inclination of mast
Rotary table slewing angle 360°
Traveling Max. traveling speed 2.3km/h
Max.grade ability 35%
Crawler Track shoe width 700mm
Distance between tracks 2960-4200mm
The length of crawler 5140mm
Average ground pressure 93.9kPa

get in touch

If you have any questions, please fill in the following information and we will respond to you in time.

  • *
Contact us now